Falls from elevated surfaces are frequently noted as one of the top 10 causes of mishaps in the workplace. Most of these accidents happen due to failure to follow fundamental ladder safety. To assist in preventing ladder injuries, practice the following ladder safety tips.
Ensure you pick the right ladder for the job, and check the length and duty rating. Proper length is a minimum of 3 feet extending over the roofline or working surface. Inspect your ladder before, checking if any of the following parts are damaged or loose, especially on an extension ladder:
Clear the location where you will be working. Do not position a ladder in front of a door that isn't locked, safeguarded, or obstructed. Since metal ladders conduct electrical power, use a wood or fiberglass ladder near powerlines or electrical devices.
Inspect that all locks on extension ladders are effectively engaged before positioning your ladder on a consistent surface. The ground beneath the ladder ought to be level and firm. Large, flat wooden boards braced underneath a ladder can assist in leveling it on an irregular surface or soft ground. Straight, single, or extension ladders must be set up at approximately a 75-degree angle.
When on a ladder, utilize the 1:4 ratio to ensure your safety. Location the base of the ladder one foot far from whatever it's leaning against for every four feet of height approximately the point of contact for the top of the ladder.
Be the one to step up and choose a safe workplace! Learn more about what TPG has to offer your business by talking with our Workers' Compensation experts at Rancho Cucamonga; Just call 909.466.7876 today!
Also, read this inspirational article and learn how you can "Become a Good Role Model" to all those around you!